Important Hints to the Marc 8 Midi driver version 2.05 for Windows 2000/XP

1. System Requirements
2. New Installation
3. Driver Update
4. What's new
5. MME, DirectSound and "Classic MME"
6. Software Sampler and Synthesizers

1. System Requirements

• Microsoft Windows 2000 SP3 or Windows XP
• Microsoft DirectX 9

2. New Driver Installation

2.1 Windows 2000

• Start your PC after installing your hardware.
• Log in using administrator privileges.
• Windows automatically recognizes at startup the newly installed device and starts the Hardware Wizard.
• During the start of Windows the Hardware Wizard searches for new drivers. Click "Next" to start the search.
• Enable the “Search for the best driver for your device” option and confirm by clicking "Next".
• Insert the supplied CD in your CD-ROM drive.
• Confirm the next dialog with „Next“
• Confirm the next window also with „Next“
• Ignore the message „Digital signature not found“ and continue the installation with „Yes“
• Windows copies the driver files and installs the Marc 8 Midi.
• After finishing the installation click "Finish”. The driver will be enabled and the Marc 8 Midi is ready to be operated without having to restart the system.

2.2 Windows XP

• Start your PC after installing your hardware.
• Log in using administrator privileges.
• Insert the supplied CD in your CD-ROM drive.
• Windows automatically recognizes at startup the newly installed device and starts the Hardware Wizard.
• Enable the option „Install Software automatically“ and confirm by clicking „Next“.
• Ignore the next message and click „Continue“
• Windows copies the driver files and installs the Marc 8 Midi.
• After finishing the installation the Marc 8 Midi is ready to be operated without having to restart the system.

3. Driver Update

• Ensure you are logged on with administrator privileges
• Uninstall the driver software by using the program "m8m_nt5_ui.exe". You can find the current version of this program in the driver setup folder.
• Restart Windows
• Logon with administrator privileges again. Now, the Windows Hardware Wizard starts with a new driver installation. Please refer 2. New Driver Installation

4. What's new

Version 2.05:

• System requirements changed
  - Windows 2000 service pack 3 solves some problems with the Microsoft Kernel Mixer
  - DirectX 9 ensures that DirectSound devices are not shown as "emulated"
• Driver's setup procedure cleans some audio related registry keys. Thus, it prevents/solves some effects of a Windows Installer anomaly, which may cause some problems with audio/midi devices
• No IRQ usage anymore
  - The IRQ number still can be found in the windows device manager but it is not used by the hardware or driver.
  - The hardware IRQ can be used exclusively by other system components.
  - IRQ incompatibilities with any other system cannot appear anymore
• Support of WDM-Audio Kernel Streaming
  Thus, "real" WDM-Audio applications like Cakewalk Sonar are able to work with extremely low latencies.
  More details you can find at MME, DirectSound and "Classic MME"
• Support of DirectSound
• Support of Windows Volume Control (Windows Mixer Device)
• Support of Tascam GSIF
  - You can use additional settings within the Marc 8 Midi Manager software to setup the GSIF latency manually.
• CPU load during recording/playback reduced
• When removing/disabling the Marc 8 Midi in the Windows device manager, a system crash could occur. Solved.
• ASIO Error Messages reviewed/changed
• MIDI

  - Problem during midi device detection under Windows XP with Emagic Logic and Propellerhead Reason solved.

  - Problem in interaction with Magix Samplitude/Sequoia 7.x solved

• Marc 8 Midi Manager

  - The main window, which were used to open the inputs and outputs windows, is now replaced by a menu. Just right click the manager icon in the taskbar to open this menu.

  - When changing the preferred device in the recording and playback device lists of the Windows control panel, in some cases the manager loses it's connection to the driver. Thus, the input and output windows could not be opened anymore. Solved.

Version 1.13:

• ASIO: performance improved when using less than all playback devices of one card
• ASIO: When using an ASIO application, the driver overrides user's clock and start/stop synchronization settings with appropriate values. (these user settings are applicable for MME applications only). Now, the driver restores the user settings again, when the last ASIO application has finished.

Version 1.12:

• Marc 8 Midi Manager Software now uses the registry branch "HKCU" to store it's settings. This solves the problem with the error message "Could not write to arc8896mix.ini" that appeared on some systems during shutdown.

Version 1.11:

• Record CPU Load decreased by 25%
• The samplerate that is used to capture input level data decreases depending on the number of cards installed down to a minimum 11.025 Hz.
• More audio clients allowed for the driver. This prevents some cases where error messages report "Unsufficient System Ressources" Or "No Memory".

Version 1.10:

• This version is compatible to MS Windows XP
• SyncBus: Start/Stop Synchronization improved

Version 1.01:

• Because of legal reasons the name "Siena" cannot be used anymore. The existing hardware and related drivers are now part of the product "Marc 8 Midi".
• MME Interface: synchronous buffer return improved

5. MME, DirectSound and "Classic MME"

5.1 MME und DirectSound:

Audio applications, who do not use ASIO, GSIF or direct WDM-Audio, now communicate with Microsoft MME (MME-WDM) or Microsoft DirectSound drivers instead of communicate with the MARIAN drivers directly. The Microsoft drivers in turn communicate with the MARIAN drivers.
For audio applications, who use these Microsoft drivers, apply:

• They can playback simultaneously using one playback device. The Microsoft Kernel Mixer mixes the playback signals of the applications into one stereo stream and routes it to one physical output device. If playback takes place with different sample rates, the Microsoft Kernel Mixer converts the sample rate of the playback streams to the highest sample rate required.
  Hint: You can improve the quality of this conversion! (See Control Panel | Sounds and Audio Devices | Audio | Sound Playback | Advanced | System Performance)
• The described simultaneous playback of different applications fails, if the output device is already in use by ASIO, GSIF, "Classic MME" or direct WDM-Audio.
• The number of the available recording and playback devices is limited:
  - under Windows 2000 to 10 devices each (20 channels)
  - under Windows XP to 32 devices each (64 channels)
  This limitation applies to the number of all audio devices installed in the system.
  You can use "Classic MME" or ASIO to walk around this limitation.
• The minimum possible latency is limited to app.. 30ms through the Microsoft Kernel Mixer architecture.
  Use ASIO or GSIF to walk around this limitation.
• Some audio applications show additional audio devices with theirs names appended by "(3+4)" or "(5+6)". This is caused by an anomaly of the Microsoft MME/DirectSound system. Please ignore these devices and do not use them.
• Some audio applications require the MARIAN driver because of its additional hardware support functions:
  - Hardware Punch In Monitoring
  - Hardware Pitch Support
  - Hardware Audio Signal Routing
  - Hardware Audio Signal Level Measurement
  
  These functions are not supported by the Microsoft drivers. Please supply this audio applications with the "Classic MME" devices.

5.2 "Classic MME"

The MARIAN driver enables you to use the MME driver interface of the previous driver versions in addition to all other driver interfaces. From now, we call this interface "Classic MME". You can activate "Classic MME" within the Marc 8 Midi Manager settings. If this driver interface is active, then you get additional recording and playback devices with the appropriate device lists. These devices have the name suffix "(MME)".
The "Classic MME" device have these advantages:

• The number of the recording and playback devices available is NOT limited (see above)
• These devices support the MARIAN hardware support functions (see above)
• These devices work much faster and have better latency values than the MME-WDM devices
• These devices ensure correct start/stop synchronization. With Windows XP, this is not guaranteed with the MME-WDM devices.

6. Software Sampler and Synthesizers

Software samplers and synthesizers normally supply MIDI output devices for other audio applications who want to use the software sampler as an instrument. If such an application starts, then normally this application opens the MIDI output devices and this in turn causes the software sampler to initialize its audio engine with the configured audio outputs.
THIS OCCURS EVEN IF YOU HAVE NOT STARTED THE SOFTWARE SAMPLER APPLICATION.

In the described situation the software sampler and the other audio application may conflict, if they use the same audio output. You can use the Marc 8 Midi with different audio applications at the same time but never the same output device simultaneously.

Therefore this hint:

• First start the software sampler/synthesizer and setup an audio output device which will NOT be used by the other audio application. Start the audio application (sequencer) afterwards.
• If you start an ASIO or GSIF application the first time, then it will use the device "Marc 8-M 1-2" for recording and playback.

The Windows Multimedia System also supplies a software synthesizer called  "Microsoft GS Wavetable SW Synth". This synthesizer has also a MIDI output port with the same name. Since there is no explicit setup for the output device, the "Microsoft GS Wavetable SW Synth" always uses the standard playback device configured in "Control Panel | Sounds and Multimedia | Audio".

(c) MARIAN Digital Audio Electronics, Leipzig 04-07-2004